Monday, January 30, 2012

Snow blower track robot base

I have always wanted to build a tracked robot, not that I don't like ones with wheels, I just think that the tracks make it look a little better. There are many types of tracks out there, from little ones on toys to larger ones on construction equipment. However, I have found that the best, medium size tracks are found on snow blowers.

I had purchased two sets of track,s both were on complete snow blowers. One ran (125 dollars) the other one was disassembled (65 dollars,) but the tracks were in good shape and complete.

I'm using two 350 watt motors from wheel chairs as they already have built in gear reduction.

Here is what a motor gearbox looks like inside with all the grease cleaned out.
The spring on the larger shaft was for the lever to disengage the gear by sliding it over on the shaft so the wheels can rotate freely.
I have removed the lever and the decided to not use the cover also as it will reduce the overall height of the motor/gearbox for more ground clearance. My new aluminum chassis uses a single aluminum plate the mount for the motors so that serves as the gearbox cover also.
Future plans include some type of two speed gearbox the the base can really move but I am still doing the CAD work and researching the gears as I would like to get it to fit into the existing gearbox.


My first chassis design was from mild steel because I could cut and weld it easily, and it was my first frame and I wasn't quite sure how I wanted it. The two 17 Ah, 12v batteries were mounted in the middle because my first thought was to keep the base a narrow as possible but as you can see in the next picture that did not provide alot of ground clearance.



In this picture the flat aluminum plate that ties the two motors together also serves
as the cover for the gearboxes. The stock cover was about 3/4" thick and had the manual lever sticking out of it.




5 comments:

  1. How exactly did you get the motors mounted to the track? Could you send me pics? Or better yet email me godmare69@Gmail.com

    ReplyDelete
  2. is there any website that you can buy the tracks like you did

    ReplyDelete
  3. Hi John, Would you mind showing how you mated the hub to the cog/drive wheel. I just want to see the mods done to the drive wheel so the hub can be mounted. Thanks in advance John!

    ReplyDelete
  4. Hi. Can you show or tell me how you got the motor shaft to connect to the drive spocket? Please email me at paddybob@comcast.net. thanks

    ReplyDelete
  5. Hi. Can you show or tell me how you got the motor shaft to connect to the drive spocket? Please email me at paddybob@comcast.net. thanks

    ReplyDelete